included in this pump spray bottle is a SnowFoam And PreWash Adaptor to ensure you can do a full pre wash process with just 1 spray bottle!
A pressurised pump sprayer that is designed for applying pre-washes, snow foam or wheel cleaner. A standard nozzle comes fitted to the pump sprayer and a foaming nozzle is included.
Please note that each pump sprayer is tested before final packing, there may be some moisture left in the pump from this test.
£10.00
HOW TO USE 1. Twist the head off the bottle and decant your detailing product into the bottle. Be sure to follow the mixing instructions on the back of the bottle if applicable. 2. Pump up the bottle until you feel resistance. 3. Push down the button to apply the product onto the vehicle until pressure starts to run down. 4. Follow steps 2 and 3 again until you are happy with the product application.
to get the best out of your pump spray
1. Always flush the pump through with water to avoid damaging the internal seals.
2. Never over pump the container, you should never have to use force to pump the bottle
CHANGING THE NOZZLE
Remove the white nozzle head and replace with the black nozzle head included in the box. When fitting ensure the white seal is inside the head before screwing to the pump sprayer.
Remove the fitted pick up tube and replace with the foaming pick up tube. Ensure that the thicker part of the tube is inserted into the pump sprayer head.
